LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 3.5L) >> In-Vehicle Repair >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the accessory drive belt and the power steering belt. For additional information, refer to ACCESSORY DRIVE - 3.5L .
  3. Using the Strap Wrench, remove the crankshaft pulley bolt and washer.
    • Discard the bolt.
      Fig 1: Location of Crankshaft Bolt And Washer
      G08020657Courtesy of FORD MOTOR CO.
  4. Using the 3 Jaw Puller, remove the crankshaft pulley.
    Fig 2: Identifying Crankshaft Damper
    G08020658Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals