LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 3.5L) >> In-Vehicle Repair >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

WARNING: This page is about a different variant/trim than selected.
    NOTE: Apply clean engine oil to the crankshaft front seal bore in the engine front cover.
    Fig 1: Identifying Crankshaft Front Seal Using Crankshaft Vibration Damper Installer And Front Crankshaft Seal Installer
    G08020665Courtesy of FORD MOTOR CO.
  1. Using the Front Crankshaft Seal Installer and Crankshaft Vibration Damper Installer, install a new crankshaft front seal.
  2. Install the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY  .
scientia non olet · About LEMON Manuals