LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 1614 (Automatic Transaxle (6F35)) >> In-Vehicle Repair >> Halfshaft Seal - LH >> Removal

Halfshaft Seal - LH: Removal

WARNING: This page is about a different car, the 2012 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the front LH halfshaft. For additional information, refer to FRONT DRIVE HALFSHAFTS .
  3. Using a suitable awl, poke a small hole in the halfshaft seal.
    Fig 1: Poking Small Hole In Halfshaft Seal Using Suitable AWL
    G06097226Courtesy of FORD MOTOR CO.
  4. Using a suitable dent puller, remove the halfshaft seal.
    Fig 2: Removing Halfshaft Seal Using Dent Puller
    G06097227Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals