Material Specifications

WARNING: This page is about a different car, the 2012 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

MATERIAL SPECIFICATIONS

Item

Specification

Fill Capacity

High Temperature 4x4 Front Axle and Wheel Bearing Grease
XG-11

WSS-M1C267-A1

Motorcraft® Metal Surface Prep
ZC-31-A

Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada)
XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada)

WSS-M2C945-A

5.0L (5.3 qt) includes filter change

Motorcraft® Specialty Green Engine Coolant
VC-10-A2 (US); CVC-10-A (Canada)

WSS-M97B55-A

⁽¹⁾

Motorcraft® Orange Antifreeze/Coolant Concentrated
VC-3-B (US); CVC-3-B2 (Canada)

WSS-M97B44-D

⁽¹⁾

Multi-Purpose Grease
Motorcraft® XL-5 (aerosol) and/or CRC® SL3151

ESB-M1C93-B

Silicone Brake Caliper Grease and Dielectric Compound
XG-3-A

ESE-M1C171-A

Silicone Gasket and Sealant
TA-30

WSE-M4G323-A4

Motorcraft® Silicone Gasket Remover
ZC-30

Thread Sealant with PTFE
TA-24

WSK-M2G350-A2

⁽¹⁾

Early build vehicle cooling systems are filled with Motorcraft® Specialty Green Engine Coolant and late build vehicle cooling systems are filled with Motorcraft® Specialty Orange Engine Coolant. Use the same type of coolant that was originally used to fill the cooling system. Do not mix coolant types. Mixing coolant types degrades the coolant corrosion protection and may damage the engine or cooling system.