LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Cluster Illumination And Panel Illumination >> Removal And Installation >> Instrument Panel Dimmer Switch >> MKZ >> Removal and Installation

Removal and Installation

  1. Remove the instrument panel side finish panel.
    2. NOTE: The switch bezel assembly is removed by releasing tabs and pushing out from behind.
  2. Release the tabs and remove the switch bezel assembly.
    • Disconnect the electrical connectors.
  3. Release the 2 tabs and remove the instrument panel dimmer switch from the switch bezel.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals