LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Evaporative Emissions System - (Hybrid) >> General Procedures >> Evaporative Emission System Leak Test >> Phase 1 - Leak Verification

Phase 1 - Leak Verification

  1. Run the EVAP Test with the scan tool.
    2. NOTE: Some small leaks may not be detected using the EVAP Test. If the system has passed the test but a leak is still suspected, then proceed to PHASE 2 .
  2. If the Evaporative Emission (EVAP) system failed the EVAP Test, then proceed to PHASE 2 .
scientia non olet · About LEMON Manuals