LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Engine Performance >> Fuel Delivery >> Fuel Tank & Fuel Lines - (Except Hybrid) >> Removal And Installation >> Inertia Fuel Shutoff (IFS) Switch - 3.5L >> Removal and Installation

Removal and Installation

  1. Remove the RH front door scuff plate.
  2. Disconnect the Inertia Fuel Shutoff (IFS) switch electrical connector.
  3. NOTE: Do not overtighten the fasteners or damage to the switch will occur.
  4. Remove the 2 bolts and the IFS switch.
    • To install, tighten to 2 Nm (18 lb-in).
  5. To install, reverse the removal procedure.