LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.5L (Hybrid) >> In-Vehicle Repair >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

    NOTE: Remove the through bolt from the Camshaft Front Oil Seal Installer.
    NOTE: Lubricate the oil seal with clean engine oil.
    Fig 1: Installing Crankshaft Front Oil Seal Using Camshaft Front Oil Seal Installer
    G06094868Courtesy of FORD MOTOR CO.
  1. Using the Camshaft Front Oil Seal Installer, install the crankshaft front oil seal.
  2. Install the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY AND CRANKSHAFT FRONT SEAL - EXPLODED VIEW  and CRANKSHAFT PULLEY  .
scientia non olet · About LEMON Manuals