LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel And Console >> Removal And Installation >> Instrument Cluster Finish Panel - MKZ >> Removal and Installation

Removal and Installation

  1. Release the 2 instrument cluster finish panel screws covers and remove the 2 instrument cluster finish panel screws.
  2. Remove the steering wheel. For additional information, refer to STEERING COLUMN .
  3. Remove the multifunction switch. For additional information, refer to STEERING COLUMN SWITCHES .
  4. Remove the LH instrument panel finish panel.
    • Pull the LH instrument panel finish panel toward the rear of the vehicle to release the retaining clips.
  5. Remove the instrument cluster finish panel.
    • Pull the instrument cluster finish panel toward the rear of the vehicle to release the retaining clips.
  6. To install, reverse the removal procedure.
    • If replacing the instrument cluster finish panel, remove the 2 register screws and transfer the register.
    • Make sure to align the LH instrument panel finish panel retaining clips to the retaining clip holes in the instrument panel.
scientia non olet · About LEMON Manuals