LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Removal And Installation >> Instrument Panel Cluster (IPC) >> Removal

Instrument Panel Cluster (IPC): Removal

NOTE: If installing a new Instrument Panel Cluster (IPC), all vehicle keys are erased during the parameter reset procedure. Verify at least 2 of the vehicle keys are available prior to carrying out this procedure.
  1. If installing a new IPC, upload the module configuration to the scan tool. For additional information, refer to MODULE CONFIGURATION , Programmable Module Installation (PMI).
  2. Remove the IPC finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  3. Remove the 3 screws and the IPC.
    • Disconnect the electrical connector.
scientia non olet · About LEMON Manuals