LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake System >> Removal And Installation >> Rear Disc Brake >> Removal

Rear Disc Brake: Removal

  1. Remove the wheel and tire. For additional information, refer to WHEELS AND TIRES .
  2. Disconnect the parking brake cable from the brake caliper.
    • Pull back the parking brake lever.
    • Disconnect the cable from the parking brake lever.
    • Remove the cable conduit retaining clip.
    • Disconnect the cable from the brake caliper.
    3. NOTE: Do not allow the brake caliper to hang from the brake hose or damage to the hose can occur.
  3. Remove the 2 brake caliper anchor plate bolts and position the brake caliper, brake pads and brake caliper anchor plate aside as an assembly.
    • Support the brake caliper, brake pads and brake caliper anchor plate assembly using mechanic's wire.
  4. Remove the 2 brake disc screws and the brake disc.
scientia non olet · About LEMON Manuals