LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake System >> Removal And Installation >> Rear Disc Brake Shield - Front Wheel Drive (FWD) >> Removal and Installation

Removal and Installation

  1. Remove the wheel bearing and wheel hub. For additional information, refer to REAR SUSPENSION .
  2. Remove the 3 brake disc shield bolts and the brake disc shield.
    • To install, tighten to 23 Nm (17 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals