LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake System >> Removal And Installation >> Rear Disc Brake Shield - All Wheel Drive (AWD) >> Removal

Rear Disc Brake Shield - All Wheel Drive (AWD): Removal

  1. Remove the wheel bearing and wheel hub. For additional information, refer to REAR SUSPENSION .
  2. Index-mark the brake disc shield to the wheel knuckle.
    Fig 1: Location of Index-Mark On Brake Disc Shield
    G06269628Courtesy of FORD MOTOR CO.
  3. Cut the brake disc shield and remove it from the wheel knuckle.
scientia non olet · About LEMON Manuals