LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake System >> Removal And Installation >> Rear Disc Brake Shield - All Wheel Drive (AWD) >> Installation

Rear Disc Brake Shield - All Wheel Drive (AWD): Installation

  1. Transfer the index mark from the removed brake disc shield to the new brake disc shield.
  2. Position the brake disc shield onto the wheel knuckle.
  3. Align the index marks and install the brake disc shield onto the wheel knuckle using the Front Subframe Bushing Remover/Installer.
    Fig 1: Installing Brake Disc Shield Onto Wheel Knuckle Using Front Subframe Bushing Remover/Installer
    G06269629Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals