Hydraulic Brake System Actuation: Specifications

MATERIAL SPECIFICATIONS

Item

Specification

Fill Capacity

High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)

WSS-M6C62-A or WSS-M6C65-A1

590-790 ml (1.24-1.66 pt)⁽¹⁾

⁽¹⁾	Actual brake fluid capacity will vary depending on vehicle options.

TORQUE SPECIFICATIONS

Description

lb-ft

lb-in

Brake booster nuts ⁽¹⁾

Brake fluid remote reservoir nuts

Brake fluid reservoir pin bolt

Brake master cylinder brake tube fittings (non-hybrid)

Brake master cylinder brake tube fittings (hybrid)

177

Brake master cylinder nuts

177

Brake pedal and bracket upper bolts

Brake pedal angle sensor screws

Brake pedal bracket bolts ⁽¹⁾

Brake pressure control valve bolts

Brake pressure control valve brake tube fittings

177

Steering column opening trim panel reinforcement bolts

⁽¹⁾	Refer to the procedure in this information.