LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System >> Removal And Installation >> Bumper - Front >> Removal and Installation

Removal and Installation

  1. Remove the front bumper cover. For additional information, refer to Bumper Cover - Front .
  2. Remove the front bumper isolator from the front bumper.
    • Pull the isolator rearward while releasing the retainers.
  3. Remove the 8 front bumper bolts (4 each side).
    • To install, tighten to 25 Nm (18 lb-ft).
  4. Remove the front bumper.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals