LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Luggage Compartment Lid Lock Cylinder >> Removal and Installation

Removal and Installation

  1. Remove the 10 pin-type retainers and the luggage compartment lid trim panel.
  2. Disconnect the luggage compartment lid lock cylinder actuating cable from the luggage compartment lid lock cylinder.
  3. If equipped, disconnect the electrical connector from the luggage compartment anti-theft inhibit switch.
  4. Remove the 2 rivets and the luggage compartment lid lock cylinder.
  5. To install, reverse the removal procedure.
    • Use the special tool to install new rivets.
scientia non olet · About LEMON Manuals