LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Hood Latch Release Handle - Secondary >> Removal and Installation

Removal and Installation

  1. Remove the 2 radiator grille pin-type retainers and the 4 radiator grille bolts.
    2. NOTE: Pull up on the radiator grille to gain access to the hood latch.
  2. Disconnect the secondary hood latch release cable from the hood latch.
  3. Remove the secondary hood latch release handle bolt.
    • To install, tighten to 12 Nm (106 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals