LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seat System - Seats >> Removal And Installation >> Seat Bolster - Rear >> Installation

Seat Bolster - Rear: Installation

    NOTE: Make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.
  1. Position the side bolster, align and insert to the latch.
  2. Align the bolt holes and install the side bolster bolt.
    • Tighten to 11 Nm (97 lb-in).
  3. Install the rear seat cushion. Refer to Seat Cushion - Rear  .
scientia non olet · About LEMON Manuals