Cooling Characteristics

• In cool mode, the TED circuits of a given seat are wired in series internally in the DCSM.
• In cool mode, the TED can remove up to 8°C (14°F) from the ambient air temperature entering the system.
• When cooling, the DCSM maintains constant speed of the fans and constant TED supply voltage (duty cycle) in open loop cool mode.
• Engine must be running over 350 RPM and seat cooling does not time out.

The climate controlled seat system is deactivated by one of the following actions:

• Selecting the HVAC module setting to manual OFF.
• Turning the vehicle OFF.