Removal and Installation

All vehicles 

1. Remove the liftgate trim panel. For additional information, refer to EXTERIOR TRIM AND ORNAMENTATION .
   • Position the water shield aside.

   Fusion 

2. Remove the luggage compartment lid panel applique. For additional information, refer to EXTERIOR TRIM AND ORNAMENTATION .
   • Disconnect the electrical connector.
3. Remove the 2 screws and the video camera and bracket assembly.

   MKZ 

4. Remove the video camera by prying on the two outer retaining tabs with a suitable tool, such as a flat bladed screwdriver.
   • Disconnect the electrical connector.

   All vehicles 

5. To install, reverse the removal procedure.