LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKX AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test K: The All-Wheel Drive (AWD) Gauge Is Inoperative >> Pinpoint Test K: The AWD Gauge Is Inoperative

Pinpoint Test K: The AWD Gauge Is Inoperative

  1. K1 RETRIEVE THE RECORDED DTCs FROM THE IPC SELF-TEST 
    • Check for recorded IPC DTCs from the self-test.
    • Are any DTCs recorded? 
  2. K2 RETRIEVE THE RECORDED DTCs FROM THE PCM SELF-TEST 
    • Check for recorded AWD system PCM DTCs from the self-test.
    • Are any DTCs recorded? 
  3. K3 CHECK THE DISPLAY MODE MENU 
    • On the optional IPC, in the display mode menu, press the LH steering wheel switch to the right to display the AWD gauge.
    • On the base IPC (Edge only), in the Information display mode, press the LH steering wheel switch to the right then down to display the AWD gauge.
    • Does the AWD gauge display? 
      • Yes  : The AWD gauge is operating correctly at this time. The display mode was not set to correct display mode.
      • No  : INSTALL a new IPC. REFER to Instrument Panel Cluster (IPC) . TEST the system for normal operation.