LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKS Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Removal And Installation >> Instrument Panel Cluster (IPC) >> Installation

Instrument Panel Cluster (IPC): Installation

  1. Position the IPC in the instrument panel, connect the electrical connector and install the 2 screws.
  2. Install the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  3. If installing a new IPC, download the IPC configuration information from the scan tool into the new IPC. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
    4. NOTE: If installing a new IPC on vehicles that are not equipped with IA, the IPC and the PCM require a parameter reset to allow the IPC and the PCM to recognize each other. Failure to carry out the parameter reset to the IPC and the PCM may result in a no start condition.
  4. If installing a new IPC on vehicles that are not equipped with IA, carry out the parameter reset procedure. For additional information, refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .
    5. NOTE: If equipped, the vehicle's Integrated Keyhead Transmitter (IKT) keys must be programmed to the new IPC.
  5. If installing a new IPC, carry out the PATS key programming. For additional information, refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .
scientia non olet · About LEMON Manuals