LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2011 >> Navigator RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel & Console >> Removal And Installation >> Power Point >> Removal

Power Point: Removal

NOTE: Power point cover may differ depending on location.
  1. Open the power point cover.
  2. Install the Power Point Socket Remover in one of the power point socket slots.
    Fig 1: Installing Power Point Socket
    G06070842Courtesy of FORD MOTOR CO.
  3. Position the Power Point Socket Remover so that it engages in the adjacent slot.
    Fig 2: Positioning Power Point Socket
    G07457231Courtesy of FORD MOTOR CO.
  4. Using the Power Point Socket Remover, pull the power point socket out of the retainer.
    Fig 3: Pulling Power Point Socket Out Of Retainer
    G06070844Courtesy of FORD MOTOR CO.
  5. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals