LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2011 >> MKT Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AI: The Headlamps On Warning Chime Is Inoperative >> Pinpoint Test Ai: The Headlamps On Warning Chime Is Inoperative

Pinpoint Test Ai: The Headlamps On Warning Chime Is Inoperative

  1. AI1 CARRY OUT THE CHIME FUNCTION ACTIVE COMMAND 
    • Ignition ON.
    • Enter the following diagnostic mode on the scan tool: IPC DataLogger.
    • Select the IPC chime command (SOUNDER_OUT).
    • Scroll through the chimes to select Lights On chime.
    • Does the headlamps on chime operate? 
    1. Yes  : GO to AI2.
    2. No  : INSTALL a new IPC. REFER to INSTRUMENT PANEL CLUSTER (IPC) . TEST the system for normal operation.
  2. AI2 CHECK THE EXTERIOR LAMPS OPERATION 
    • Ignition OFF.
    • Place the headlamp switch in the PARKING LAMP position.
    • Do the parking lamps operate? 
    1. Yes  : GO to AI3.
    2. No  : REFER to EXTERIOR LIGHTING SYSTEM article.
  3. AI3 CHECK THE DOOR AJAR WARNING INDICATOR OPERATION 
    • Ignition ON.
    • Open then close the LH front door while observing the door ajar message center warning indicator in the IPC message center.
    • Does the door ajar message center warning indicator operate correctly? 
    1. Yes  : INSTALL a new SJB. REFER to MULTIFUNCTION ELECTRONIC MODULES article. TEST the system for normal operation.
    2. No  : GO to PINPOINT TEST X .
scientia non olet · About LEMON Manuals