Symptom Table

NOTE: Refer to Description and Operation, Intelligent Access (IA) with Push Button Start in ANTI-THEFT SYSTEM - PASSIVE ANTI-THEFT SYSTEM (PATS) article to review the procedures for achieving the various ignition states (ignition off, ignition in accessory, ignition on, ignition start) on vehicles with this feature.

SYMPTOM TABLE

Condition	Possible Sources	Action
All the stoplamps are inoperative	Fuse Wiring, terminals or connectors Adaptive cruise control stoplamp relay (if equipped) Stoplamp switch	VERIFY the bulbs are OK, If OK, GO to PINPOINT TEST K .
One or more stoplamps are inoperative	Wiring, terminals or connectors Rear lamp jumper harness High mounted stoplamp Rear lamp assembly Rear window glass	VERIFY the bulb(s) are OK, If OK, GO to PINPOINT TEST L .
The stoplamps are on continuously	Wiring, terminals or connectors Adaptive cruise control stoplamp relay (if equipped) Stoplamp switch ABS module Remote Function Actuator (RFA) module Smart Junction Box (SJB) PCM	GO to PINPOINT TEST M .