Symptom Table

NOTE: Refer to Description and Operation, Intelligent Access (IA) with Push Button Start in ANTI-THEFT SYSTEM - PASSIVE ANTI-THEFT SYSTEM (PATS) article to review the procedures for achieving the various ignition states (ignition off, ignition in accessory, ignition on, ignition start) on vehicles with this feature.

SYMPTOM TABLE

Condition	Possible Sources	Action
The reversing lamps are inoperative	Fuse Wiring, terminals or connectors Reversing lamps relay PCM	Make sure the bulbs are OK. If OK, GO to PINPOINT TEST X .
The individual reversing lamp is inoperative	Wiring, terminals or connectors Rear lamp jumper harness	Make sure the bulb is OK. If OK, GO to PINPOINT TEST Y .
The reversing lamps are on continuously	Wiring, terminals or connectors Reversing lamps relay Auto-dimming interior mirror Sunshade module (if equipped) PCM	GO to PINPOINT TEST Z .