LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2011 >> MKS EcoBoost >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.5L GTDI >> In-Vehicle Repair >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

  1. Remove the accessory drive belt. For additional information, refer to ACCESSORY DRIVE BELT article.
  2. Using the Strap Wrench, remove the crankshaft pulley bolt and washer.
    • Discard the bolt.
      Fig 1: Removing Crankshaft Pulley Bolt And Washer Using Strap Wrench
      G07815214Courtesy of FORD MOTOR CO.
  3. Using the 3 Jaw Puller, remove the crankshaft pulley.
    Fig 2: Removing Crankshaft Pulley Using Jaw Puller
    G07815215Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals