LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2011 >> MKS EcoBoost >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.5L GTDI >> In-Vehicle Repair >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

    NOTE: Apply clean engine oil to the crankshaft front seal bore in the engine front cover.
    Fig 1: Installing Crankshaft Front Seal
    G07815222Courtesy of FORD MOTOR CO.
  1. Using the Front Crankshaft Seal Installer and Crankshaft Vibration Damper Installer, install a new crankshaft front seal.
  2. Install the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY  in this service information.
scientia non olet · About LEMON Manuals