LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2011 >> MKS EcoBoost >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Accessory Drive System >> Removal And Installation >> Accessory Drive Belt Tensioner - 3.7L >> Removal

Accessory Drive Belt Tensioner - 3.7L: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING article.
  2. Working from the top of the vehicle, rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the generator pulley.
  3. Remove the 7 pin-type retainers and the RH splash shield.
  4. Remove the 3 bolts and the accessory drive belt tensioner.
scientia non olet · About LEMON Manuals