IPC Configuration
The IPC contains items that are configurable. While some configurable items are customer preference items, most items are configured at the end of the line production and only available for configuration through the PMI procedure or by using As-Built data. Refer to MODULE CONFIGURATION SYSTEM article.
IPC CONFIGURATION PARAMETERS
| Customer Preference Parameter | As-Built Parameter |
|---|---|
| - | ABS/Roll Stability Control (RSC®) |
| - | Autolamps |
| - | Autolock |
| - | Auto-unlock |
| - | AutoPark |
| Belt-Minder® | - |
| - | Compass present |
| - | Default language |
| - | Easy entry/exit |
| - | Electric power assist steering |
| - | Engine type |
| - | Front parking aid |
| - | Fuel cap off |
| - | Gear select |
| Gulf | coast country destination - |
| - | Integrated Keyhead Transmitter (IKT) |
| - | Key-in-ignition warning chime |
| - | MyKey™ |
| - | Oil life threshold |
| Overspeed | Warning |
| - | Power liftgate |
| - | Rear parking aid |
| - | RSC® chime warning |
| - | Tank configuration |
| - | Tank selection |
| - | Tire Pressure Monitoring System (TPMS) |
| - | Tire mobility kit |
| - | Trailer sway |
| - | Welcome strategy |
| - | 2-wheel drive/All-Wheel Drive (AWD) |