Pinpoint Test Al: The Turn Signal On Warning Chime Is Inoperative

AL1 CHECK THE KEY-IN-IGNITION WARNING CHIME OPERATION
- Ignition OFF.
- On vehicles without Intelligent Access (IA), insert the key into the ignition lock cylinder.
- On vehicles equipped with IA, place the ignition in the ACC mode.
- Open the LH front door and observe the key-in-ignition warning chime operation.
- Does the key-in-ignition warning chime operate correctly?
  - Yes : GO to AL2.
  - No : GO to PINPOINT TEST AI (chime is always on) or GO to PINPOINT TEST AJ (chime is inoperative).
AL2 CHECK THE TURN SIGNAL INDICATORS OPERATION
- Ignition ON.
- Verify the turn signal indicators operation.
- Do the turn signal indicators operate correctly?
  - Yes : GO to AL3.
  - No : GO to PINPOINT TEST U .
AL3 CHECK THE ODOMETER FOR CORRECT OPERATION
- Drive the vehicle and observe the odometer for correct operation.
- Does the odometer operate correctly?
  - Yes : INSTALL a new SJB. REFER to MULTIFUNCTION ELECTRONIC MODULES article. TEST the system for normal operation.
  - No : GO to PINPOINT TEST H .