- The roof opening panel leaks
|
- Roof opening panel weatherstrip/seals
- Front sliding glass panel alignment
- Rear fixed glass panel alignment
- Roof opening panel drain trough
- Roof opening panel drain hose(s)
|
|
- The roof opening panel does not open or close - front sliding glass panel
|
- Front sliding glass panel motor not initialized
- Fuse
- Circuitry
- Roof opening panel switch
- Front sliding glass panel motor
|
|
- The roof opening panel does not open or close in VENT position
|
- Circuitry
- Roof opening panel switch
- Front sliding glass panel motor
|
|
- The one-touch open/close/vent is inoperative - front sliding glass panel
|
- Front sliding glass panel motor not initialized
- Front sliding glass panel motor
|
|
- The roof opening panel does not open or close - power shade
|
- Power shade motor not initialized
- Fuse
- Circuitry
- Roof opening panel switch
- Power shade motor
|
|
- The one-touch open/close is inoperative - power shade
|
- Power shade motor not initialized
- Power shade motor
|
|
- The roof opening panel does not stop in FLUSH from any position
|
- Incorrect front sliding glass panel or rear fixed glass panel alignment
|
|
- The global open/closing function is inoperative
|
- Circuitry
- Front sliding glass panel motor
- Door window motors
|
|
- The roof opening panel shows unexpected bounce back at high speed
|
- Circuitry
- Front sliding glass panel motor initialization
|
- CHECK CIRCUIT CDC41 (WH/BN) for an open. REPAIR circuit. TEST the system for normal operation.
- REINITIALIZE the front sliding glass panel motor. REFER to ROOF OPENING PANEL MOTOR INITIALIZATION in this service information. TEST the system for normal operation.
|