Global Open/Close (if equipped)
NOTE:
The global open feature may be enabled/disabled via scan tool or in some cases modified by the customer following a procedure listed in the vehicle Owner's Literature. For a complete list of available programmable parameters, refer to
MODULE CONFIGURATION SYSTEM
article.
The Smart Junction Box (SJB) sends a signal on the global open/close circuit to the front sliding glass panel motor to move the front sliding glass panel to the VENT position or CLOSED position based upon a signal received from the Remote Keyless Entry (RKE) transmitter. If the accessory delay relay is active, the global open feature will not operate. For information about the accessory delay relay, refer to WINDOWS AND GLASS - GLASS, FRAMES AND MECHANISMS article.