Sliding Glass Panel Operation

To open the roof opening panel, press and release the slide control switch. The roof opening panel will open automatically. The roof opening panel movement can be stopped at any time by pressing the switch again. To close the roof opening panel, pull and release the slide or tilt control switch. The roof opening panel will close automatically. The roof opening panel movement can be stopped at any time by activating the slide or tilt control switch in either direction. To vent the roof opening panel, the roof opening panel must first be in the fully CLOSED position. Press and release the tilt control switch. The roof opening panel will move to the VENT position automatically. The roof opening panel can be closed by pulling either the tilt or slide control switch.