Power Shade Operation

To open the power shade, press and release the shade control switch. When the power shade is in the fully CLOSED position and the shade control switch is pressed, the power shade will automatically open and stop at the front glass panel. Pressing the shade control switch a second time will allow the power shade to open past the rear glass panel (full open position). To close the power shade, pull and release the shade control switch. When the power shade is in the fully OPEN position and the shade control switch is pulled, the power shade will close and stop at the rear glass panel. Pulling and releasing the shade control switch a second time will allow the power shade to the front glass panel (full CLOSED position). With the sliding glass panel in the fully OPEN position, the power shade is disabled to prevent wind damage.