Global Open/Close (if equipped): Notes
NOTE:
The global open feature may be enabled/disabled via scan tool or in some cases modified by the customer following a procedure listed in the vehicle Owner's Literature. For a complete list of available programmable parameters, refer to
MODULE CONFIGURATION SYSTEM
article.
The Smart Junction Box (SJB) sends a signal on the global open/close circuit to the roof opening panel motor to move the sliding glass panel to the CLOSED or VENT position as well as open and close both front door and rear door windows based on a signal received from the Remote Keyless Entry (RKE) transmitter. If the accessory delay relay is active, the global open feature will not operate. For information about the accessory delay relay, refer to WINDOWS AND GLASS - GLASS, FRAMES AND MECHANISMS article.