LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2011 >> MKS EcoBoost >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seat System - Seats >> Removal And Installation >> Heated Seat Switch - Rear >> Removal and Installation

Removal and Installation

  1. Remove the rear panel from the front floor console in the following sequence.
    1. Pull to separate the rear panel.
    2. Disconnect the LH and RH heated seat switch electrical connectors.
    3. If equipped, disconnect the power point electrical connector.
  2. Release the clips and remove the heated seat switch(es).
  3. To install, reverse the removal procedure.