Normal Operation
The passenger seat control switch is supplied battery voltage on circuit CBX05 (VT/RD) and ground on circuit GD903 (BK/WH). When pressed, the seat control switch supplies voltage and ground to the appropriate power seat track or recliner motor to move the seat or backrest.
There are 3 power seat track motors that combine to move the seat cushion horizontally (forward/backward) and vertically (front up/down and rear up/down). There is an additional motor in the recliner mechanism to pivot the seat backrest forward and backward.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Seat control switch
- Seat track motor (seat track assembly)
- Power recliner motor