Symptom Table

NOTE: Refer to Description and Operation, Intelligent Access (IA) with Push Button Start in ANTI-THEFT SYSTEM - PASSIVE ANTI-THEFT SYSTEM (PATS) to review the procedures for achieving the various ignition states (ignition off, ignition in accessory, ignition on, ignition start) on vehicles with this feature.

SYMPTOM TABLE

Condition	Possible Sources	Action
The turn signal lamps are inoperative	Fuse Wiring, terminals or connectors Multifunction switch Smart Junction Box (SJB)	Make sure the bulbs are OK. If OK, GO to PINPOINT TEST N .
The turn signal lamps are always on	Wiring, terminals or connectors Multifunction switch SJB	GO to PINPOINT TEST O .
One turn signal/hazard lamp is inoperative/always on	Wiring, terminals or connectors Bulb holder Rear lamp jumper harness SJB	Make sure the bulb is OK. If OK, GO to PINPOINT TEST P .
The hazard lamps are inoperative/always on	Wiring, terminals or connectors HVAC module (without navigation) Front Controls Interface Module (FCIM) (with navigation) SJB	GO to PINPOINT TEST Q .