LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2010 >> Navigator RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 449 (Engine - 6.8L (3V) -- F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Piston >> Disassembly

Disassembly And Assembly Of Subassemblies: Piston: Disassembly

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clips.
    Fig 1: Identifying Piston Clips
    G04648069Courtesy of FORD MOTOR CO.
  2. Remove the piston pin from the piston and connecting rod assembly.
    Fig 2: Identifying Piston Pin
    G03921069Courtesy of FORD MOTOR CO.
  3. Remove the connecting rod from the piston.
    Fig 3: Identifying Connecting Rod And Piston
    G03921070Courtesy of FORD MOTOR CO.
  4. Clean and inspect the piston and connecting rod. For additional information, refer to ENGINE SYSTEM-GENERAL INFORMATION .