LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2010 >> MKZ FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 727 (Instrument Panel And Console) >> Removal And Installation >> Instrument Cluster Center Finish Panel >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel center finish panel. For additional information, refer to Instrument Panel Center Finish Panel  in this article.
  2. Remove the 2 instrument cluster center finish panel screws.
  3. Lift up and then rearward to remove the instrument cluster center finish panel.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals