Removal and Installation
NOTE:
It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, refer to AUDIO CONTROL MODULE (ACM) SELF-DIAGNOSTIC MODE .
- Upload the ACM configuration information to the scan tool. For additional information, refer to PROGRAMMABLE MODULE INSTALLATION (PMI) .
- Remove the Front Controls Interface Module (FCIM). For additional information, refer to FRONT CONTROLS INTERFACE MODULE (FCIM) - MKZ .
- Remove the 8 screws and the ACM .
- To install, reverse the removal procedure.
- Download the ACM configuration information from the scan tool. For additional information, refer to PMI in MODULE CONFIGURATION .
NOTE:
Module configuration is required when a new ACM
is being installed.