Removal And Installation
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Glove compartment removed for clarity.
- Remove the RH instrument panel insulator.
- If replacing the parking aid speaker only, proceed as follows:
- Disconnect the parking aid speaker electrical connector.
- Disengage the parking aid speaker retainers.
- Remove the parking aid speaker.
- If replacing the parking aid module, proceed as follows:
- Disconnect the electrical connectors.
- Remove the parking aid module pin-type retainers.
- Remove the parking aid module.
- To install, reverse the removal procedure.