Negative battery cable
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the screw and position the battery ground cable terminal aside.
- To install, tighten to 30 Nm (22 lb-ft).
- Remove the nut and position the positive battery cable bracket aside.
- Tighten to 40 Nm (30 lb-ft).
- Remove the stud and position the battery ground cable terminal aside.
- To install, tighten to 63 Nm (46 lb-ft).
- Remove the bolt and position the battery ground cable-to-frame terminal aside.
- To install, tighten to 25 Nm (18 lb-ft).
NOTE:
Position the RH splash shield aside to access the battery ground cable bolt.