LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2010 >> MKZ AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 821 (Handles, Locks, Latches And Entry Systems (F250-F550)) >> Removal And Installation >> Hood Latch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark the position of the hood latch.
  2. Remove the 2 hood latch bolts.
    • To install, tighten to 12 Nm (9 lb-ft).
  3. Disconnect the hood latch release cable from the hood latch.
    • Disconnect the cable conduit.
    • Disconnect the cable.
  4. Remove the hood latch.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals