LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2010 >> MKZ AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 797 (Climate Control - F250-F550) >> Removal And Installation >> Blower Motor >> Removal And Installation >> Vehicles with 6.0L diesel

Vehicles with 6.0L diesel

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the retainers and the insulator.
    Fig 1: Removing Retainers And Insulator
    GF0008030Courtesy of FORD MOTOR CO.
  2. Disconnect the electrical connector from the vacuum pump.
    Fig 2: Locating Electrical Connector
    GF0008031Courtesy of FORD MOTOR CO.
  3. Remove the bolts.
    • To install, tighten to 11 Nm (8 lb-ft).
    Fig 3: Locating Bolts
    GF0008032Courtesy of FORD MOTOR CO.
  4. Disconnect the vacuum hose and remove the vacuum pump and mounting bracket.
    Fig 4: Disconnecting Vacuum Hose
    GF0008033Courtesy of FORD MOTOR CO.