Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the 8 pin-type retainers and remove the upper radiator sight shield.

Fig 1: Identifying Pin-Type Retainers
Courtesy of FORD MOTOR CO.
Remove the 2 upper pin-type retainers and position aside the air deflector.

Fig 2: Identifying Upper Pin-Type Retainers
Courtesy of FORD MOTOR CO.
Detach the ambient temperature sensor pin-type retainer.

Fig 3: Identifying Ambient Temperature Sensor Pin-Type Retainer
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector and remove the ambient temperature sensor.

Fig 4: Locating Electrical Connector
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.