LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2010 >> MKZ AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1038 (Electronic Engine Control System - 2.3L - (Except Hybrid)) >> Removal And Installation >> Clutch Pedal Position (CPP) Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the clutch pedal position (CPP) switch electrical connector.
  2. Rotate the CPP switch clockwise and remove the CPP switch.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals