LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2010 >> MKZ AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1018 (Charging System (Battery, Mounting And Cables)) >> Removal And Installation >> Battery Tray >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery. For additional information, refer to Battery .
  2. Release the battery cable retainers from the battery tray.
  3. Remove the 4 battery tray bolts.
    • To install, tighten to 9 Nm (80 lb-in).
  4. Remove the battery tray.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals